639
edits
Changes
Jump to navigation
Jump to search
mLine 3:
Line 3: − + + + + + + +
Fiber Rough Cut Procedure (view source)
Revision as of 19:36, 7 January 2014
, 19:36, 7 January 2014no edit summary
The fiber cutting table was designed as a dual purpose workstation. The following steps explain how this workstation is used to provide a way of cutting the fibers from their spools (a.k.a. rough cut). Later sections of procedure detail the use of parts of this work station as an alignment tool for the long light guides during fiber splicing.
The fiber cutting table was designed as a dual purpose workstation. The following steps explain how this workstation is used to provide a way of cutting the fibers from their spools (a.k.a. rough cut). Later sections of procedure detail the use of parts of this work station as an alignment tool for the long light guides during fiber splicing.
'''Procedures'''
'''Procedure'''
* Don safety equipment: eye protection.
* Ensure: sleeves are rolled up, hair is tied back, and jewlery is secured.
* Locate logbook used for data recording.
* Make sure the Dremel cutting tool is unplugged then visually inspect:
** Ensure cutting wheel is secure and not cracked