Changes

|}

|}

* When a bundle is completed, turn off the fusing unit by turning the two power switches off. Underneath the fusing unit, decrease the pressure of the compressor and turn off the red switch which powers the compressor.  

* When a bundle is completed, turn off the fusing unit by turning the two power switches off. Disconnect the hose from the compressor to return the splicing unit to atmospheric pressure.  

* Once the compressor is back to atmospheric pressure, open the bottom valve above a container. Condensed water residue should leak out. This drains the compressor tank.

 

* The compressor tank should be drained every day after fusing is done. First warn people in the lab that there will be a loud noise from draining the compressor. Then open the bottom valve of the compressor above a container. Air and condensed water residue will escape with a loud hissing sound. Tilt the tank to make sure all the water drains from the tank. Once the pressure in the tank has dropped all the way, close the bottom valve and let the tank refill.