1,037
edits
Changes
Jump to navigation
Jump to search
Line 74:
Line 74: + + +
no edit summary
I should not adjust any setting of the splicer. If there is something wrong, I should tell Dr. Jones and Jim. The regulators should be 35 PSI on the left and 40 PSI on the right. If they are more than 5 PSI off, there is a problem but I should not adjust them. If the grippers move all the way to the right, I should stop the fusing as long as the light has not turned on. If the light has already turned on, the fibers will be damaged and I should stop fusing any more fibers.
I should not adjust any setting of the splicer. If there is something wrong, I should tell Dr. Jones and Jim. The regulators should be 35 PSI on the left and 40 PSI on the right. If they are more than 5 PSI off, there is a problem but I should not adjust them. If the grippers move all the way to the right, I should stop the fusing as long as the light has not turned on. If the light has already turned on, the fibers will be damaged and I should stop fusing any more fibers.
5/30/18
I found the [https://campbellhausfeld.com/air-compressor-1-gallon-pancake-oilless-36-cfm-33hp-120v-3a-fp2028.html?category_id=66 website for the air compressor we will use for fiber cleaning]. It is a Campbell Hausfeld FP2028 compressor.