1,037
edits
Changes
Jump to navigation
Jump to search
Line 72:
Line 72: + +
p
I checked the downward force just after the light turns on, and it increases then. It is not when the horizontal pressure is applied but when the light turns on that that downward force increases. I can still push the top ferrule up a little but it is more difficult when the light is on.
I checked the downward force just after the light turns on, and it increases then. It is not when the horizontal pressure is applied but when the light turns on that that downward force increases. I can still push the top ferrule up a little but it is more difficult when the light is on.
I should not adjust any setting of the splicer. If there is something wrong, I should tell Dr. Jones and Jim. The regulators should be 35 PSI on the left and 40 PSI on the right. If they are more than 5 PSI off, there is a problem but I should not adjust them. If the grippers move all the way to the right, I should stop the fusing as long as the light has not turned on. If the light has already turned on, the fibers will be damaged and I should stop fusing any more fibers.