* If the Unistrut bar is not in the heat treating pipe, and if the collars have been removed, set out:
* If the Unistrut bar is not in the heat treating pipe, and if the collars have been removed, set out:
** 6 or 7 light guide collars
** 6 or 7 light guide collars
−
** 12 or 14 half inch 440 screws.
+
** 12 or 14 half inch 440 screws
** Bundling tool
** Bundling tool
** aluminum bar
** aluminum bar
Line 22:
Line 22:
|}
|}
−
* Don a clean pair of gloves
+
* Don a clean pair of gloves.
* If the aluminum bar has just been removed from the heat treating pipe, it will still have a bundle of straightened fibers on it. In this case you may not need extra collars and screws.
* If the aluminum bar has just been removed from the heat treating pipe, it will still have a bundle of straightened fibers on it. In this case you may not need extra collars and screws.
*Unscrew the collars and remove the straightened bundle.
*Unscrew the collars and remove the straightened bundle.