Changes

Jump to navigation Jump to search
m
no edit summary
Line 12: Line 12:  
* Locate logbook used for data recording.
 
* Locate logbook used for data recording.
 
* Make sure the Dremel cutting tool is unplugged then visually inspect:
 
* Make sure the Dremel cutting tool is unplugged then visually inspect:
** Ensure cutting wheel is secure and not cracked
   
** Verify electrical cord is in good working order.
 
** Verify electrical cord is in good working order.
 
** Make sure the power switch is in the off position.
 
** Make sure the power switch is in the off position.
* Put a diamond blade on the Dremel.
+
* Put a diamond blade on the Dremel. (Ensure that the cutting wheel is secure and not cracked.)
    
[[File:Dremel2.JPG|thumb|center|upright|The Dremel tool used to cut the fibers, with a diamond blade and foam pad, and an example of appropriate eye wear.]]
 
[[File:Dremel2.JPG|thumb|center|upright|The Dremel tool used to cut the fibers, with a diamond blade and foam pad, and an example of appropriate eye wear.]]
105

edits

Navigation menu