File:LabViewProgram3.PNG|The front panel of the LabView program.
File:LabViewProgram3.PNG|The front panel of the LabView program.
−
File:LabViewProgram1.PNG|Part 1 of the block diagram. The majority of this part of the program is to read the output given by the DAQ, translate it to a temperature, and plot the results.
+
File:LabViewProgram1.PNG|Part 1 of the block diagram: The majority of this part of the program is to read the output given by the DAQ, translate it to a temperature, and plot the results.
−
File:LabViewProgram2.PNG|Part 2 of the block diagram. The main purpose of this part of the program is to determine if the temperature read from part 1 is what was specified in the front panel, and to turn the water pump and heater on or off as appropriate.
+
File:LabViewProgram2.PNG|Part 2 of the block diagram: The main purpose of this part of the program is to determine if the temperature read from part 1 is what was specified in the front panel, and to turn the water pump and heater on or off as appropriate.