Changes

==LabView Program==

==LabView Program==

During the summer of 2012, Ben Willis wrote a LabView program that would communicate with a NetBooter and ultimately control a heater and water pump. LabView also plots the temperature of water being heated, and plots the changing temperatures on a graph on the front panel.  I have added a little to Ben's work, but not much. Before Ben left, he wrote a [[media:Final_Report.pdf|final report]] of his work on the program and in the lab in general.

During the summer of 2012, Ben Willis wrote a LabView program that would communicate with a NetBooter and ultimately control a heater and water pump. LabView also plots the temperature of water being heated, and plots the changing temperatures on a graph on the front panel. Before Ben left, he wrote a [[media:Final_Report.pdf|final report]] of his work on the program and in the lab in general. I have added a little to Ben's work, mostly housekeeping; deleting some non functioning commands, adding the equation to represent temperature based on voltage, adding an equation for a thermocouple, and connecting with the DAQ.  I also plan to make a differential op-amp to allow the DAQ to read the inputs given by the thermocouple.  In this way, we will be able to use a thermistor and two thermocouples to control the water temperature in both the straightening pipe and the bending tank.