Fiber.png|Figure 4: Image of the mating joint of 2 cm. of scintillating fiber BCF-20 (left) joined to 165 cm. light guide fiber BCF-98 (right). This picture was taken during the prototyping phase when optical epoxy was used to mate the fibers, the current method of joining fibers uses thermal fusing. | Fiber.png|Figure 4: Image of the mating joint of 2 cm. of scintillating fiber BCF-20 (left) joined to 165 cm. light guide fiber BCF-98 (right). This picture was taken during the prototyping phase when optical epoxy was used to mate the fibers, the current method of joining fibers uses thermal fusing. |