179
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + + + + +
Temperature Control Program (view source)
Revision as of 18:59, 2 December 2015
, 18:59, 2 December 2015no edit summary
The temperature control program is a LabView VI, which checks and regulates the temperature of the [[Fiber Heating Box]]. Once the program is initiated it will turn on the hotplate in the heating box and keep it on until either the temperature climbs too high or a user has indicated a stop or stop condition. The program outputs commands to a netbooter, which is the hotplate's voltage source, and reads inputs from thermistors through a DAQ.
The temperature control program is a LabView VI, which checks and regulates the temperature of the [[Fiber Heating Box]]. Once the program is initiated it will turn on the hotplate in the heating box and keep it on until either the temperature climbs too high or a user has indicated a stop or stop condition. The program outputs commands to a netbooter, which is the hotplate's voltage source, and reads inputs from thermistors through a DAQ.
The front panel displays a waveform chart, which will display each temperature measurement, digital temperature and time displays, and various controls to set parameters.
==Instructions for a Heating Run==