321
edits
Changes
Jump to navigation
Jump to search
Line 145:
Line 145: + + + + + + + + + +
Darkbox Fiber Testing Setup (view source)
Revision as of 01:12, 5 October 2015
, 01:12, 5 October 2015no edit summary
*The CPU should have an ethernet cable connecting it to the hub.
*The CPU should have an ethernet cable connecting it to the hub.
== Testing the setup ==
=== Testing the dark box ===
*Use a camera with a 60 second exposure to test the light seal of the dark box
*Verify that signals are coming from the electronics by using an oscilloscope. High gain will allow you to see the dark rate.
*Similarly, verify that the pulser is providing signals by reading both outputs on the scope.
=== Testing the crate ===
*Turn on the pulser and the electronics
*By hand perform a run using the CODA interface
*Error messages will appear in the CODA interface
== Data Taking ==
== Data Taking ==