1,870
edits
Changes
Jump to navigation
Jump to search
Pulser amplitude feedback amplifier (view source)
Revision as of 11:50, 20 June 2014
, 11:50, 20 June 2014Created page with "===Purpose=== The pulse generator built by Alex Barnes and Jon Kulakofsky produces -10V pulses of duration 1ns fwhm. These pulses are split 90:10 at the output of the pulse ge..."
===Purpose===
The pulse generator built by Alex Barnes and Jon Kulakofsky produces -10V pulses of duration 1ns fwhm. These pulses are split 90:10 at the output of the pulse generator circuit, and driven out two coaxial cables. The -1V signal matches expectations for a NIM logic signal, and is fed into a discriminator to generate a trigger for the data acquisition. The coaxial cable carrying the -9V pulse is coupled directly from the coax cable conductors to the pins of a laser diode of type DL3148-025 - 635 nm, 5 mW, Ø5.6 mm. The [http://www.thorlabs.com/thorcat/11800/DL3148-025-AutoCADPDF.pdf data sheet for the laser diode] shows the following pin-out for the SOT23 package.
The pulse generator built by Alex Barnes and Jon Kulakofsky produces -10V pulses of duration 1ns fwhm. These pulses are split 90:10 at the output of the pulse generator circuit, and driven out two coaxial cables. The -1V signal matches expectations for a NIM logic signal, and is fed into a discriminator to generate a trigger for the data acquisition. The coaxial cable carrying the -9V pulse is coupled directly from the coax cable conductors to the pins of a laser diode of type DL3148-025 - 635 nm, 5 mW, Ø5.6 mm. The [http://www.thorlabs.com/thorcat/11800/DL3148-025-AutoCADPDF.pdf data sheet for the laser diode] shows the following pin-out for the SOT23 package.