Changes

*We need to find something that is low cost but is accurate enough to be stopped at each fiber array block. This would call for a low pitch. One example I've found is as low as 8mm pitch with 200 teeth making a 1.6 meter timing belt. Because the intended light source for calibration is most likely going to have a wide range, 8mm is a fair sized step as the scintillators are 2mm each but grouped in blocks.

*We need to find something that is low cost but is accurate enough to be stopped at each fiber array block. This would call for a low pitch. One example I've found is as low as 8mm pitch with 200 teeth making a 1.6 meter timing belt. Because the intended light source for calibration is most likely going to have a wide range, 8mm is a fair sized step as the scintillators are 2mm each but grouped in blocks.

*For support: Overhead Enclosed-Track Conveyor Bracket, linear guide rail

*For support: Overhead Enclosed-Track Conveyor Bracket, linear guide rail

[[File:linear motion setup.png|thumb|Clamping Plate Setup]]

[[File:linear motion setup.png|thumb|Linear Motion Setup]]

==== Motor ====

==== Motor ====