261
edits
Changes
Jump to navigation
Jump to search
mLine 597:
Line 597: − +
Digital control board documentation (view source)
Revision as of 20:06, 15 June 2009
, 20:06, 15 June 2009→Thermal Diode
=== Thermal Diode ===
=== Thermal Diode ===
The DAC has a built in thermal diode. The diode drop from anode to cathode is 0.65V at 25°C. It changes at a rate of -2.20mV/°C. The anode of this diode is connected to the +5V power island, and the cathode is connected to a 270K resistor to ground. The voltage between the cathode and the resistor is connected to VIN1 (pin 15) on the ADC).
The DAC has a built in thermal diode. The diode drop from anode to cathode is typically 0.65V at 25°C. It changes at a rate of -2.20mV/°C. The anode of this diode is connected to the +5V power island, and the cathode is connected to a 270K resistor to ground. The voltage between the cathode and the resistor is connected to VIN1 (pin 15) on the ADC).
=== Pinout Table ===
=== Pinout Table ===