1,037
edits
Changes
Jump to navigation
Jump to search
Line 7:
Line 7: − +
→Procedure
==Procedure==
==Procedure==
* Do not adjust any settings without permission. If any settings appear wrong, tell the principal investigator (Dr. Jones).
* Do not adjust any settings for the splicing unit or compressor without permission. If any settings appear wrong, tell the principal investigator (Dr. Jones).
* Power up the fusing unit by turning the two power switches on. The compressor should always be plugged in and turned on, with the red power switch down in a horizontal position. The pressure gauge for the compressor tank should read between 100 and 120 PSI. The regulator pressure should be set to 89 psi.
* Power up the fusing unit by turning the two power switches on. The compressor should always be plugged in and turned on, with the red power switch down in a horizontal position. The pressure gauge for the compressor tank should read between 100 and 120 PSI. The regulator pressure should be set to 89 psi.