Changes

1/22: I read Micah's suggested steps to take. I took out light guide bundle 407 and looked at how far the screw was sticking out of the front collar. It looks like the screw is barely protruding from the collar if it is at all, so that screw seems to be the right length. There is a little plastic from tapping sticking out around the screw hole, but it doesn't seem likely to scrape against the wheel.

1/22: I read Micah's suggested steps to take. I took out light guide bundle 407 and looked at how far the screw was sticking out of the front collar. It looks like the screw is barely protruding from the collar if it is at all, so that screw seems to be the right length. There is a little plastic from tapping sticking out around the screw hole, but it doesn't seem likely to scrape against the wheel.

I need to learn the fiber numbering scheme being used in the lab, but for now I have my own, which involves placing the bundle on the styrofoam as if it were time to polish. The top of the bundle is then the uppermost side when the fibers are put against the wheel, and there are 6 rows and 5 columns. Looking at the end of the bundle to be polished, fibers 1 to 5 in my own scheme are in the top row from left to right, and each row below includes the next 5 fibers counted left to right. Therefore the bottom row consists of fibers 26 to 30. I need to translate my numbers into the standard system in the lab once I understand it.

I need to learn the fiber numbering scheme being used in the lab, but for now I have my own [https://uconn-my.sharepoint.com/:p:/g/personal/benjamin_willis_uconn_edu/EQsllWpw0spPtfGbtscVwIgBMlVhO_klS26Tp8XewdAgxA?e=KYp623 as shown in a diagram], which involves placing the bundle on the styrofoam as if it were time to polish. The top of the bundle is then the uppermost side when the fibers are put against the wheel, and there are 6 rows and 5 columns. Looking at the end of the bundle to be polished, fibers 1 to 5 in my own scheme are in the top row from left to right, and each row below includes the next 5 fibers counted left to right. Therefore the bottom row consists of fibers 26 to 30. I need to translate my numbers into the standard system in the lab once I understand it.

I explained my way of numbering the fibers, and Jim said it would be all right as long as I document it with a diagram.

I explained my way of numbering the fibers, and Jim said it would be all right as long as I document it with a diagram.