321
edits
Changes
Jump to navigation
Jump to search
Line 6:
Line 6: + +
Tagger Microscope Status (view source)
Revision as of 14:29, 17 October 2014
, 14:29, 17 October 2014no edit summary
On September 26, 2014 the hodoscope counters have been placed back. This involved removing the wheels from the base of the microscope and lowering the entire enclosure because the hodoscope counters did not fit over the bar holding the fibers down after the S-bend. We will worry about the proper adjustment of the fibers when survey and alignment come on Wednesday.
On September 26, 2014 the hodoscope counters have been placed back. This involved removing the wheels from the base of the microscope and lowering the entire enclosure because the hodoscope counters did not fit over the bar holding the fibers down after the S-bend. We will worry about the proper adjustment of the fibers when survey and alignment come on Wednesday.
As of October 16th the microscope is fully cabled. There were two additional holes drilled and the 90 degree bends for the cables have been removed. A note of caution for any future cabling: if slack needs to be taken out of the cables, <u>unplug the cables from the backplanes</u>. Failure to do so will result in the lemo base connectors on the backplane being ripped out.