1,004
edits
Changes
Jump to navigation
Jump to search
mLine 31:
Line 31: − + − − + Line 72:
Line 71: − +
Tagger Microscope Mechanical Design (view source)
Revision as of 01:32, 7 October 2010
, 01:32, 7 October 2010→3-point Fiber Array Adjustment
The 83 oz⋅in Lin Engineering 4118L-01 (1.9") Step Motor has been chosen. The unit is close in price to the lower torque models and does not exceed the 2 A limit of the inexpensive [[:media:StepMotorDriver_R208-manual.pdf|driver]] (meant for lower-end motors).
The 83 oz⋅in Lin Engineering 4118L-01 (1.9") Step Motor has been chosen. The unit is close in price to the lower torque models and does not exceed the 2 A limit of the inexpensive [[:media:StepMotorDriver_R208-manual.pdf|driver]] (meant for lower-end motors).
The combination of these devices have been found easy to control: the driver has simple direction and step resolution selection pins and uses TTL pulses as step commands. The shaft of the motor, which comes smooth (as in the adjacent picture) when bought from distributors. However, it tested to be more than soft enough to machine a flat into it. A cylindrical "sleeve" with threaded outer surface may be inserted over it and tightened against the flat a small headless screw.
The combination of these devices have been found easy to control: the driver has simple direction and step resolution selection pins and uses TTL pulses as step commands. The shaft of the motor, which comes smooth (as in the adjacent picture) when bought from distributors. However, it tested to be more than soft enough to machine a flat into it. A cylindrical "sleeve" with threaded outer surface may be inserted over it and tightened against the flat by with set screws.
== Adjustment to the Electron Crossing Angle ==
== Adjustment to the Electron Crossing Angle ==
{|
{|
| [[Image:CrossingAngle_lowE.png]] || [[Image:CrossingAngle.png]]
| [[Image:CrossingAngle_lowE.png|350px]] || [[Image:CrossingAngle.png|350px]]
|-
|-
| [[Image:ParallelRailingConcept.png|370px]]
| [[Image:ParallelRailingConcept.png|370px]]
Dimensioned Drawings
Dimensioned Drawings
* [[:media:http://zeus.phys.uconn.edu/~senderovich/GlueX/Tagger/MechDesign/TaggerMicroscope_outerdim.pdf|Outer Dimensions of Tagger Microscope enclosure]]
* [http://zeus.phys.uconn.edu/~senderovich/GlueX/Tagger/MechDesign/TaggerMicroscope_outerdim.pdf Outer Dimensions of Tagger Microscope enclosure]
== See Also ==
== See Also ==
* [[:media:StepMotorDriver_R208-manual.pdf|R208 Step Motor Driver]]
* [[:media:StepMotorDriver_R208-manual.pdf|R208 Step Motor Driver]]