Tagger Microscope Construction

From UConn PAN
Revision as of 18:49, 29 August 2014 by Barnes (talk | contribs)
Jump to navigation Jump to search

Tagger Microscope & Active Collimator Construction for Hall-D

WORK IN PROGRESS

Construction Plan

Construction Plan

  • Tagger Microscope **View 1
  • Active Collimator

Material Safety Data Sheets

Permatex - Ultra Black Gasket Maker

Permatex - Black Silicone Adhesive Sealant

Krylon - Indoor/Outdoor Flat Black Spray Paint

Quality Assurance & Acceptance Test Plan

Quality Assurance Plan

  • Tagger Microscope & Active Collimator


Production Schedule

  • Milestones
  • Construction Schedule

Active Collimator

The active collimator has been delivered to JLab by John Bartolotta. It is currently housed in the TED building where it can be fully assembled and tested.

Alex Barnes is now responsible for assembling and testing the active collimator while at JLab.

Below are pictures of the assembling process

A machined screw for the RF connectorActive collimator 01.jpgActive collimator 02.jpgActive collimator 03.jpg
Active collimator 04.jpgActive collimator 05.jpgActive collimator 06.jpgActive collimator 07.jpg
Active collimator 08.jpgActive collimator 09.jpgActive collimator 10.jpgActive collimator 11.jpg

References