Difference between revisions of "Tagger Microscope Construction"

From UConn PAN
Jump to navigation Jump to search
Line 17: Line 17:
  
 
[https://docs.google.com/document/d/1JL40gx7tPDDFu4aSiad3fTemAp0yiVBPI6D8FB5zb6o/edit Quality Assurance Plan]
 
[https://docs.google.com/document/d/1JL40gx7tPDDFu4aSiad3fTemAp0yiVBPI6D8FB5zb6o/edit Quality Assurance Plan]
−
 
−
==Production Schedule==
 
−
 
−
* Milestones
 
−
* Construction Schedule
 
−
'''
 
−
 
−
==Active Collimator==
 
−
The active collimator has been delivered to JLab by John Bartolotta. It is currently housed in the TED building where it can be fully assembled and tested.
 
−
 
−
Alex Barnes is now responsible for assembling and testing the active collimator while at JLab.
 
−
 
−
Below are pictures of the assembling process
 
−
<gallery perrow=6>
 
−
image:collimator_machined_screw.jpg|A machined screw for the RF connector.
 
−
image:active_collimator_01.jpg|The back of the active collimator with only 4 installed wedges.
 
−
image:active_collimator_02.jpg|This is another view of the back of the active collimator with only 4 wedges installed.
 
−
image:active_collimator_03.jpg|The active collimator with only 4 wedges installed. This was taken on the bench at JLab.
 
−
image:active_collimator_04.jpg|The spare wedges provided by FSU.
 
−
image:active_collimator_05.jpg|The fifth wedge has been installed.
 
−
image:active_collimator_06.jpg|Closer shot of the fifth wedge. Notice how the wedge covers the hole slightly. This was noticed and fixed during the assembly process.
 
−
image:active_collimator_07.jpg|The sixth wedge has been installed in the active collimator.
 
−
image:active_collimator_08.jpg|The inner wedges have been adjusted to prevent blockage of the central hole.
 
−
image:active_collimator_09.jpg|The seventh wedge of the collimator has been installed.
 
−
image:active_collimator_10.jpg|All wedges have been installed in the active collimator.
 
−
image:active_collimator_11.jpg|A closer view of all eight wedges of the active collimator.
 
−
</gallery>
 
  
 
==References==
 
==References==
  
 
* [[private:fiber_properties_datasheets|Properties of St. Gobain double-clad fibers]]
 
* [[private:fiber_properties_datasheets|Properties of St. Gobain double-clad fibers]]

Revision as of 10:13, 20 October 2014

Tagger Microscope Construction for Hall-D

Construction Plan

Construction Plan View 1

Material Safety Data Sheets

Permatex - Ultra Black Gasket Maker

Permatex - Black Silicone Adhesive Sealant

Krylon - Indoor/Outdoor Flat Black Spray Paint

Quality Assurance & Acceptance Test Plan

Quality Assurance Plan

References

Retrieved from "https://zeus.phys.uconn.edu/wiki/index.php?title=Tagger_Microscope_Construction&oldid=9320"