*Individual channel 14 was missing C2. We placed the component on ourselves.
*Individual channel 14 was missing C2. We placed the component on ourselves.
+
*There was a wrong resistor where the 100k resistor should be. This was replaced.
+
*Changed the 35.7k resistor in the voltage reference to 130k in order to increase the current on each transistor leg.
+
*The voltage regulator for AMPREF had the wrong pin out in our drawings. We rotated it so that VCC_VRef moved to where AMPREF was and a wire attaches from AMPREF to where VCC_VRef was.
+
= Board 2 =
= Board 2 =
*Individual channel 15 had 2 RBi's instead of an RBi and a CBi. We replaced the wrong RBi with the correct CBi.
*Individual channel 15 had 2 RBi's instead of an RBi and a CBi. We replaced the wrong RBi with the correct CBi.
+
*The 100k resistor in the summer part of the voltage reference was actually a 442k resistor.
+
*The voltage regulator for AMPREF had the wrong pin out in our drawings. We rotated it so that VCC_VRef moved to where AMPREF was and a wire attaches from AMPREF to where VCC_VRef was.
+
*Changed the 35.7k resistor in the voltage reference to 130k in order to increase the current on each transistor leg.