Here is a list of changes made to the boards received from Sierra Circuits.
Here is a list of changes made to the boards received from Sierra Circuits.
−
*Board 3: individual channels 11 and 15 had 2 RBi's instead of an RBi and a CBi. We replaced the wrong RBi with the correct CBi.
+
= Board 1 =
−
*Board 2: individual channel 15 had 2 RBi's instead of an RBi and a CBi. We replaced the wrong RBi with the correct CBi.
+
−
*Board 1: individual channel 14 was missing C2. We placed the component on ourselves.
+
*Individual channel 14 was missing C2. We placed the component on ourselves.
+
+
= Board 2 =
+
+
*Individual channel 15 had 2 RBi's instead of an RBi and a CBi. We replaced the wrong RBi with the correct CBi.
+
+
= Board 3 =
+
+
*Individual channels 11 and 15 had 2 RBi's instead of an RBi and a CBi. We replaced the wrong RBi with the correct CBi.
+
*The 100k resistor in the voltage reference was actually a 442k resistor.
+
*The voltage regulator for AMPREF had the wrong pin out in our drawings. We rotated it so that VCC_VRef moved to where AMPREF was and a wire attaches from AMPREF to where VCC_VRef was.