Changes

I started working mainly on production this month. This involved learning the procedures for measuring, straightening, fusing, and painting the fiber bundles. Below are things I've learned are important to look for during production:

I started working mainly on production this month. This involved learning the procedures for measuring, straightening, fusing, and painting the fiber bundles. Below are things I've learned are important to look for during production:

'''Measuring:'" The lab completed all rough-cut measuring of all the bundles this month! Kenny is the fastest at measuring. We found that one of the micrometers sticks at a point and is no longer in use.  

'''Measuring:''' The lab completed all rough-cut measuring of all the bundles this month! Kenny is the fastest at measuring. We found that one of the micrometers sticks at a point and is no longer in use.  

'''Straightening:''' Make sure the anchor screws for each collar are evenly tightened and tight enough to not become angled due to the tension. Also double check the 5x6 matrix before inserting the fibers into the PVC.  

'''Straightening:''' Make sure the anchor screws for each collar are evenly tightened and tight enough to not become angled due to the tension. Also double check the 5x6 matrix before inserting the fibers into the PVC.