289
edits
Changes
Jump to navigation
Jump to search
Line 40:
Line 40: + +
Hot Water Fiber Bending Procedure (view source)
Revision as of 16:36, 22 May 2014
, 16:36, 22 May 2014→Orientation
*Put a collar around the bundle so that it is secure around the fibers but does not cause damage. The fibers should not be able to slide through, rotate, or change orientation.
*Put a collar around the bundle so that it is secure around the fibers but does not cause damage. The fibers should not be able to slide through, rotate, or change orientation.
**'''Note:''' While working with one end of the bundle, always be cautious of the other end. Any bends may cause damage to the fiber.
**'''Note:''' While working with one end of the bundle, always be cautious of the other end. Any bends may cause damage to the fiber.
[[File:JK First Bending Collar.JPG|thumb|center|After the fibers have been properly aligned in the bundling tool and the tool has been rotated a collar is placed on the fibers to secure them in their positions.]]
==Bending Procedure==
==Bending Procedure==