Difference between revisions of "Fiber Dimension Statistics"

From UConn PAN
Jump to navigation Jump to search
Line 5: Line 5:
 
==Average Width of Fibers==   
 
==Average Width of Fibers==   
  
An analysis on the average width of the fibers was performed to check how many were over the desired average width (2.03mm). The width of each fiber was measured at fifteen different points as a part of the cutting process. Histogram A shows the spread of average fiber width; while most fibers are below the 2.03mm benchmark, there are still a significant amount
+
An analysis on the average width of the fibers was performed to check how many were over the desired average width (2.03mm). The width of each fiber was measured at fifteen different points as a part of the cutting process. Histogram A shows the spread of average fiber width; almost all fibers meet the width specification with less than fiver percent exceeding the threshold width (2.03mm).
 
[[File:Total Average.png|600px|thumb|center|Histogram A: Average width of all fibers.]]
 
[[File:Total Average.png|600px|thumb|center|Histogram A: Average width of all fibers.]]
 +
In order to gauge how accurately the averages represented the fibers, the standard deviations of the widths were also plotted. On histogram B the distribution of the standard deviation of width of each fiber is shown.

Revision as of 01:37, 6 May 2016

This page was created by Andrew Sampino who's logbook for spring 2016 can be found here

The raw data for all of the reported statistics on this page can be found in this spreadsheet

Average Width of Fibers

An analysis on the average width of the fibers was performed to check how many were over the desired average width (2.03mm). The width of each fiber was measured at fifteen different points as a part of the cutting process. Histogram A shows the spread of average fiber width; almost all fibers meet the width specification with less than fiver percent exceeding the threshold width (2.03mm).

Histogram A: Average width of all fibers.

In order to gauge how accurately the averages represented the fibers, the standard deviations of the widths were also plotted. On histogram B the distribution of the standard deviation of width of each fiber is shown.