578
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + + +
Construction of the Full-Scale Tagger Microscope (view source)
Revision as of 15:12, 16 January 2015
, 15:12, 16 January 2015→Current Work
=Current Work=
=Current Work=
We are currently in production of 12 additional fiber bundles to replace the low-performing bundles from the last production run. Current progress is being kept in the [https://docs.google.com/a/uconn.edu/spreadsheets/d/1AZPVzbwDgBWl5UXUVSnz_8_0yO6rmNUTt_MeylHasTQ/ Fibers - 2015 Google Spreadsheet].
We are currently in production of 12 additional fiber bundles to replace bundles which are currently installed in the microscope. We found that our light guide fibers were not double clad, but were only single clad. In August and September of 2014, we received a new order of BCF-98 and BCF-20 which we verified as multi-clad using EDX techniques. In addition to having a second cladding layer, we are also attempting to maintain the optical qualities best by minimizing strain on fibers by removing some of the fiber procedures.
Current progress is being kept in the [https://docs.google.com/a/uconn.edu/spreadsheets/d/1AZPVzbwDgBWl5UXUVSnz_8_0yO6rmNUTt_MeylHasTQ/ Fibers - 2015 Google Spreadsheet].
=Procedures for Tagger Microscope Construction=
=Procedures for Tagger Microscope Construction=