Visual Inspection

Cladding

The following end-on pictures were taken of a scintillating fiber and a light guide segment under a microscope, after the ends have been polished using office paper. From these pictures, it is difficult to discern any difference between multi-clad fiber and single-clad. The scintillating fiber (light blue-green tint) is multi-clad according to the manufacturer Saint-Gobain, whereas the light guide in these photographs is single-cladding fiber.

Effects of Painting

These are photos of Fiber 3 of Bundle 7. We are looking to see if there is any damage that can be seen on the areas of a fiber which were painted and cleaned in comparison to the area which the fiber was never painted.

Unpainted, Straight

These are photos of the straight section of fiber which was never painted. The are of fibers 3 of Bundle 7.

Painted and Cleaned, Straight

These photos are from the long section of fiber which was painted and then cleaned with water and a cloth.

Painted and Cleaned Fuse

Photos of the Fuse site can be seen on the Visual Inspection Photos 4-28-2014 page.

Heated Cleaning Process

This is fiber 13 of Bundle 7. This fiber was placed in steam before the paint was removed with water and a cloth. The paint did come off easier. The first three photos are of the unpainted section of fiber and the second three photos are of the cleaned section of fiber which were cleaned after being steamed.