581
edits
Changes
Jump to navigation
Jump to search
Line 28:
Line 28: − + + + − * The following photos are of the inside of the Lambda Physik EMG 101 MSC Excimer Laser. − [[Image:excimer_laser_inside.jpg|300px]] [[Image:excimer_laser_insideB.jpg|300px]] [[Image:excimer_laser_insideC.jpg|300px]]
Diamond Radiator Thinning Using an Excimer Laser (view source)
Revision as of 19:36, 12 November 2009
, 19:36, 12 November 2009→Updates
* Preparation for moving the Excimer laser has begun.
* Preparation for moving the Excimer laser has begun.
* Initial diagnostics on the laser's state have also begun, however the real testing begins once we are able to take the laser head cover off.
* Initial diagnostics on the laser's state have also begun, however the real testing begins once we are able to take the laser head cover off.
* After having a conversation with Jeff Edberg from Coherent Inc. it was recommended that we check a circulating fan inside the laser head. If the fan doesn't turn then it may lead to the end of the project as parts are extremely hard to find. Fortunately, after removing the laser head cover, the fan spun freely without restriction.
* After having a conversation with Jeff Edberg from Coherent Inc. it was recommended that we check a circulating fan inside the laser head. If the fan doesn't turn then it may lead to the end of the project as parts are extremely hard to find. Fortunately, after removing the laser head cover, the fan spun freely without restriction.
* The following photos are of the inside of the Lambda Physik EMG 101 MSC Excimer Laser.
[[Image:excimer_laser_inside.jpg|300px]] [[Image:excimer_laser_insideB.jpg|300px]] [[Image:excimer_laser_insideC.jpg|300px]]
* The next step is to transfer the laser down to Dr. Barry Wells' laboratory.
* The next step is to transfer the laser down to Dr. Barry Wells' laboratory.
* Once the power supply, main exhaust, water supply, and gases are installed properly, we will pressurize the system with helium and check for leaks as well as test the HV power supply.
* Once the power supply, main exhaust, water supply, and gases are installed properly, we will pressurize the system with helium and check for leaks as well as test the HV power supply.