1,870
edits
Changes
Jump to navigation
Jump to search
mLine 40:
Line 40: − +
Tagger microscope prototype construction (view source)
Revision as of 16:29, 15 January 2008
, 16:29, 15 January 2008→Cleaving and Polishing Techniques
'''Step 2'''
'''Step 2'''
* <u>Scintillators:</u> The segments cut using the ''Work Stand Assembly'' have an extra millimeter or so in length made by design so that by the end of the polishing process the segment will be of the proper length of 2 cm. That being said, if the fiber is border line unacceptable, see if the cladding is broken too far as not to be recovered by polishing.
* <u>Scintillators:</u> The segments cut using the ''Work Stand Assembly'' have an extra millimeter or so in length made by design so that by the end of the polishing process the segment will be of the proper length of 2 cm. That being said, if the fiber is borderline unacceptable, it can still be used provided that enough of the cladding is still intact to leave a sufficient length, once the defective part has been removed by polishing.
* <u>Waveguides:</u> With that extra 1/2 cm you alloted yourself, it should be possible to recover, through polishing, most if not all the unacceptable fibers.
* <u>Waveguides:</u> With that extra 1/2 cm you alloted yourself, it should be possible to recover, through polishing, most if not all the unacceptable fibers.