Changes

[[Image:workstandassembled.jpg|thumb|Work Stand Apparatus]]

[[Image:workstandassembled.jpg|thumb|Work Stand Apparatus]]

* We designed our own apparatus to cut, polish, and glue the scintillators and the waveguides. For more information on how it works [[Work Stand Assembly]].   

* We designed our own apparatus to cut, polish, and glue the scintillators and the waveguides. For more information on how it works, see [[Work Stand Assembly]].   

* To cut the fibers I use a standard hobby knife.   

* To cut the fibers I use a standard hobby knife.   

* For cleaning and polishing acrylic fibers, the recommended tool to use is a plastic nail buff.

* For cleaning and polishing acrylic fibers, the recommended tool to use is a plastic nail buff.

* A digital scale (accurate to ±0.01 grams) used to weigh out the proper proportions of the resin and catalyst.  

* A digital scale (accurate to ±0.01 grams) is used to weigh out the proper proportions of the resin and catalyst.  

* Glassware for weighing, mixing, and applying the epoxy.  

* Standard laboratory glassware is used for weighing, mixing, and applying the epoxy.  

* A Laboratory Hotplate is used to heat-cure the epoxy.  

* A laboratory hotplate is used to heat-cure the epoxy.  

* An infrared thermometer used for calibrating the hotplate.

* An infrared thermometer is used for calibrating the hotplate temperature controls.

For more information (such as prices and product numbers) on the equipment listed above see [[Supplies]]

For more information (such as prices and product numbers) on the equipment listed above see [[Supplies]]