1,037
edits
Changes
Jump to navigation
Jump to search
Line 38:
Line 38: + +
no edit summary
2/16: Yesterday I started polishing a bundle of sci-fis that are cut to 0.907 inches. The screw holding the collar on the guide was on the left. With the micrometer I measured the space where we put the feeler gauges. It was about 0.09". I wanted to try bottoming out to the 0.025" feeler gauge. I twisted right in front at the polishing wheel and left in back away from the wheel.
2/16: Yesterday I started polishing a bundle of sci-fis that are cut to 0.907 inches. The screw holding the collar on the guide was on the left. With the micrometer I measured the space where we put the feeler gauges. It was about 0.09". I wanted to try bottoming out to the 0.025" feeler gauge. I twisted right in front at the polishing wheel and left in back away from the wheel.
2/19: Using the Carson camera, I identified which fibers are in each position in the bundle to be tested. Jim will show me tomorrow how to use the alignment collar for testing. I continued polishing the sci-fi bundle after identifying the fibers.