|
|
| Line 4: |
Line 4: |
| | | | |
| | ==Surface Imperfections== | | ==Surface Imperfections== |
| | + | [[File:Cropped Used Surface imperfections 1 DSC 0200 (2).JPG Detailed surface imperfections in previously processed light guide. (MFR: Saint Gobain BCF-98)]] |
| | | | |
| | =New Fibers= | | =New Fibers= |
Revision as of 06:08, 28 December 2015
Used Fibers
Light Loss Along Length
The effect of many surface imperfections becomes obvious when looking at a length of illuminated light guide. (Previously processed light guide. MFR: Saint Gobain BCF-98)
Surface Imperfections
File:Cropped Used Surface imperfections 1 DSC 0200 (2).JPG Detailed surface imperfections in previously processed light guide. (MFR: Saint Gobain BCF-98)
New Fibers
Clarity
Freshly cut light guide demonstrates remarkable clarity and minimal light loss. These images illustrate the smoothness of an undamaged surface.
Figure 1: Light Guide recently cut from spool shows exceptional clarity under laser light. (MFR Saint Gobain BCF-98)
Figure 3: Polished end of light guide away from light source, recently cut from spool. Long exposure reveals minimal light loss relative to end. (MFR Saint Gobain BCF-98)
Figure 2: Top view of light guide recently cut from spool. Uniform brightness indicates few surface abnormalities. (MFR Saint Gobain BCF-98)
Damage from Clamp
Other Surface Imperfections
Minimal surface imperfections visible near end of new light guide.
Imperfections along edge in new light guide.
Two sides of the wave guide are visible and minimal light loss is observed. Bright region due to laser angle.
