261
edits
Changes
Jump to navigation
Jump to search
SiPM digital control board power supplies (view source)
Revision as of 18:37, 25 June 2008
, 18:37, 25 June 2008→+3.3V supply: added temperature sensor supply
Line 28:
Line 28:
***TODO: Determine what logic output values are from temperature sensor and see if they will be compatible
**REF_IN supply
**REF_IN supply
***Using +3.3V for REF_IN limits the SiPM amplifier bias voltages to a maximum of 165V. If greater variability is needed (up to +200V max), a separate +4V supply can be used for REF_IN, perhaps taken from the +5V rail via a voltage divider.
***Using +3.3V for REF_IN limits the SiPM amplifier bias voltages to a maximum of 165V. If greater variability is needed (up to +200V max), a separate +4V supply can be used for REF_IN, perhaps taken from the +5V rail via a voltage divider.
+*AD7314 temperature sensor
+**VDD supply
+***indicates ±1°C accuracy
+***should make compatible with 3.3V CMOS logic
*CP2201 Ethernet
*CP2201 Ethernet
**AV+ analog supply
**AV+ analog supply
Line 38:
Line 42:
***Makes it compatible with 3.3V CMOS logic
***Makes it compatible with 3.3V CMOS logic
***Puts it within acceptable range of voltages for communication with other ICs
***Puts it within acceptable range of voltages for communication with other ICs
−=== +2.5V supply ===
=== +2.5V supply ===