Difference between revisions of "BW April 2018"
Jump to navigation
Jump to search
(Created page with "4/2: I sanded several thick fibers in bundle 405 to get them through the chimneys more easily. Andrew put the fibers back in the collar and aligned them before I left, but we...") |
|||
| Line 2: | Line 2: | ||
I also practiced fusing today. | I also practiced fusing today. | ||
| + | |||
| + | 4/4: This week I started polishing a fourth bundle of sci-fis. I am still twisting right in front and left in back. | ||
| + | |||
| + | Yesterday during fusing practice the hook on one of the 500 g weights broke, and today Jim suggested wire as a replacement. | ||
| + | |||
| + | I worked on preparing light guide bundle 403 for testing today. | ||
Revision as of 20:38, 4 April 2018
4/2: I sanded several thick fibers in bundle 405 to get them through the chimneys more easily. Andrew put the fibers back in the collar and aligned them before I left, but we still wanted to improve the alignment. I recorded the new configuration and tried to improve the alignment, but a Kapton strip broke and after I replaced it I did not get a very good alignment.
I also practiced fusing today.
4/4: This week I started polishing a fourth bundle of sci-fis. I am still twisting right in front and left in back.
Yesterday during fusing practice the hook on one of the 500 g weights broke, and today Jim suggested wire as a replacement.
I worked on preparing light guide bundle 403 for testing today.