105
edits
Changes
Jump to navigation
Jump to search
no edit summary
Line 17:
Line 17:
* Set the cutting speed to 7.
* Plug in the Dremel tool.
* Plug in the Dremel tool.
−*Check that the ventilation hose is secure and start the ventilation system.
*Check that the ventilation hose is secure and start the ventilation system.
Line 44:
Line 43:
** Place the end of the fiber against the mark that provides the fiber stop.
** Place the end of the fiber against the mark that provides the fiber stop.
** Place weights to hold the fiber in place and to keep it from bending to its original position while cutting.
** Place weights to hold the fiber in place and to keep it from bending to its original position while cutting.
−* Hold the spool end of the fiber in place with your left hand.
+* Hold the spool end of the fiber in place with your left hand.
+* Don safety goggles.
+* Set the Dremel cutting speed to 7.
* Cut the fiber along the notch with the Dremel.
* Cut the fiber along the notch with the Dremel.