1,037
edits
Changes
Jump to navigation
Jump to search
Line 166:
Line 166: +
Hot Water Fiber Bending Procedure (view source)
Revision as of 19:31, 29 May 2014
, 19:31, 29 May 2014→Use the Start Buttons
*The temperature reading from the thermistor, displayed in "Temperature Degrees Fahrenheit," should reach 155 degrees before bending starts.
*The temperature reading from the thermistor, displayed in "Temperature Degrees Fahrenheit," should reach 155 degrees before bending starts.
**The actual temperature is about 4 degrees higher according to an alcohol thermometer.
**The actual temperature is about 4 degrees higher according to an alcohol thermometer.
====Measure the Water Temperature====
*Before bending the fibers, measure the water temperature with the alcohol thermometer.
*Before bending the fibers, measure the water temperature with the alcohol thermometer.
**The temperature for bending should be between 155 and 160 degrees Fahrenheit.
**The temperature for bending should be between 155 and 160 degrees Fahrenheit.