261
edits
Changes
Jump to navigation
Jump to search
mLine 3:
Line 3: − +
Digital control board documentation (view source)
Revision as of 19:59, 15 June 2009
, 19:59, 15 June 2009→Required Voltages: fixed link problem
== Power Requirements ==
== Power Requirements ==
=== Required Voltages ===
=== Required Voltages ===
All components on the digital board '''except the DAC''' can be tested using only a +5V source. The DAC requires +5V, -5V, and a high voltage corresponding to 10V higher than the maximum desired DAC output voltage (see [[#Setting the Output Range | Setting the Output Range). Digital and analog grounds must be connected as well before any testing takes place.
All components on the digital board '''except the DAC''' can be tested using only a +5V source. The DAC requires +5V, -5V, and a high voltage corresponding to 10V higher than the maximum desired DAC output voltage (see [[#Setting the Output Range | Setting the Output Range]]). Digital and analog grounds must be connected as well before any testing takes place.
=== Power Pins ===
=== Power Pins ===