1,037
edits
Changes
Jump to navigation
Jump to search
Line 42:
Line 42: + +
no edit summary
To remove the wings, I should put the fiber down and run the point of the razor along the side until it cuts through the wing. I could also try sandpaper and look with the microscope or camera at the results.
To remove the wings, I should put the fiber down and run the point of the razor along the side until it cuts through the wing. I could also try sandpaper and look with the microscope or camera at the results.
I need to do some test fuses to find out where the crack in the ferrule is. The fibers are marked with masking tape on one side. That side will be facing up and towards me as I fuse. I also marked one fiber with a Sharpie, but that did not go as well and the mark should be disregarded.