Changes

===Orientation===

===Orientation===

*First ensure that each part of the bending unit is clean and don a pair of powder-free gloves. If the bending unit is not clean, see the [http://zeus.phys.uconn.edu/wiki/index.php/Fiber_Bending_Procedure#Post-Bending_Procedure_and_Cleaning Post Bending Cleaning Procedure].

[[File:aligner.JPG|thumb|left|Bundling tool.]]*First ensure that each part of the bending unit is clean and don a pair of powder-free gloves. If the bending unit is not clean, see the [http://zeus.phys.uconn.edu/wiki/index.php/Fiber_Bending_Procedure#Post-Bending_Procedure_and_Cleaning Post Bending Cleaning Procedure].

*Attach bottom fiber collars 2-7 (as labeled in the image in [http://zeus.phys.uconn.edu/wiki/index.php/Fiber_Bending_Procedure#Setting_Up_The_Plates Setting Up The Plates] ) to the Bending Plate. The bottom collars are the ones with the male threads, not through holes.

*Attach bottom fiber collars 2-7 (as labeled in the image in [http://zeus.phys.uconn.edu/wiki/index.php/Fiber_Bending_Procedure#Setting_Up_The_Plates Setting Up The Plates] ) to the Bending Plate. The bottom collars are the ones with the male threads, not through holes.

*Open the intermediate storage box and remove the fibers you will be bending. Place these fibers on a flat surface, always being cautious with the fuse site.

*Open the intermediate storage box and remove the fibers you will be bending. Place these fibers on a flat surface, always being cautious with the fuse site.

*Use the bundling tool to place the fibers in the correct orientation and position as defined by the Bundle Names Google Document. Remember that the orientation listed in the Bundle Names document is from the view of the scintillating fibers.

*Use the bundling tool to place the fibers in the correct orientation and position as defined by the Bundle Names Google Document. Remember that the orientation listed in the Bundle Names document is from the view of the scintillating fibers.