Difference between revisions of "File:JK End Milling 3.JPG"

Latest revision as of 18:09, 15 January 2014

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	18:09, 15 January 2014		2,448 × 3,264 (674 KB)	Jonathank (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Canon
Camera model	Canon PowerShot A590 IS
Exposure time	1/60 sec (0.016666666666667)
F Number	f/2.6
ISO speed rating	200
Date and time of data generation	14:20, 14 January 2014
Lens focal length	5.8 mm
Width	2,448 px
Height	3,264 px
Bits per component	8 8 8
Pixel composition	RGB
Orientation	Normal
Number of components	3
Horizontal resolution	180 dpi
Vertical resolution	180 dpi
Software used	Adobe Photoshop CS6 (Macintosh)
File change date and time	14:22, 14 January 2014
Y and C positioning	Centered
Exif version	2.2
Date and time of digitizing	14:20, 14 January 2014
Meaning of each component	Y Cb Cr does not exist
Image compression mode	5
APEX shutter speed	5.90625
APEX aperture	2.75
APEX exposure bias	0
Maximum land aperture	2.75 APEX (f/2.59)
Metering mode	Pattern
Flash	Flash fired, auto mode
Supported Flashpix version	1
Color space	sRGB
Focal plane X resolution	14,506.666666667
Focal plane Y resolution	14,485.207100592
Focal plane resolution unit	inches
Sensing method	One-chip color area sensor
File source	Digital still camera
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Scene capture type	Standard
Lens used	5.8-23.2 mm
Date metadata was last modified	09:22, 14 January 2014
Unique ID of original document	96B7F929225882B74224BCD4697A395F