135
edits
Changes
Jump to navigation
Jump to search
mLine 120:
Line 120: + + Line 131:
Line 133: − + − * Add more diagrams to this page − * Create diagrams to be added to this page − * Add even more diagrams to this page − * Refer to diagrams − * Add diagrams to this page
Lens Assembly Structural Analysis (view source)
Revision as of 19:32, 29 April 2010
, 19:32, 29 April 2010→Future Improvements
== Aperture ==
== Aperture ==
[[Image:Lens_side_trim.png|thumb|A side view of the lens assembly. Notice that because of the entry angle, one of the illustrated beams is cut off before reaching the second lens. The final image will be only the remaining half of the original.]]
The above equations can generate images magnified or offset beyond what the camera can resolve, as the camera lens assembly has a radius of 3.75 cm. To compensate for this and prevent resolution of an image larger than the camera can allow, we need to superimpose over our final offset and magnified image the effects of the lens assembly. At any given lens, the image will be at either its maximum or minimum magnification counting from the previous lens. These lenses can be generated by the equation
The above equations can generate images magnified or offset beyond what the camera can resolve, as the camera lens assembly has a radius of 3.75 cm. To compensate for this and prevent resolution of an image larger than the camera can allow, we need to superimpose over our final offset and magnified image the effects of the lens assembly. At any given lens, the image will be at either its maximum or minimum magnification counting from the previous lens. These lenses can be generated by the equation
== Future Improvements ==
== Future Improvements ==
* Add diagrams to this page
* Unknown