Difference between revisions of "BW July 2018"

From UConn PAN
Jump to navigation Jump to search
(Created page with "7/13: Yesterday I did some practice fuses and then fused four productions fibers in bundle 404 using a piece of sponge gasket to keep the clamps from bottoming out. The work w...")
 
Line 4: Line 4:
  
 
While Andrew was learning to fuse scrap fibers with the sponge gasket, I cut more short fibers. Later I cleaned a bundle of shorts scraps and started polishing a new one.
 
While Andrew was learning to fuse scrap fibers with the sponge gasket, I cut more short fibers. Later I cleaned a bundle of shorts scraps and started polishing a new one.
 +
 +
7/18: The piece of sponge gasket for gripping fibers was missing today. I may have lost it while cleaning up the fusing work station today. Andrew made a new one.

Revision as of 21:11, 18 July 2018

7/13: Yesterday I did some practice fuses and then fused four productions fibers in bundle 404 using a piece of sponge gasket to keep the clamps from bottoming out. The work was slow because it took me a long time to remove wings.

Today Jim said Andrew was getting very good results from fusing. He suggested that Andrew should take over as primary fusing technician. That may be a good idea since Andrew seems to be quicker at removing wings.

While Andrew was learning to fuse scrap fibers with the sponge gasket, I cut more short fibers. Later I cleaned a bundle of shorts scraps and started polishing a new one.

7/18: The piece of sponge gasket for gripping fibers was missing today. I may have lost it while cleaning up the fusing work station today. Andrew made a new one.