Line 12:
Line 12:
* Locate logbook used for data recording.
* Locate logbook used for data recording.
* Make sure the Dremel cutting tool is unplugged then visually inspect:
* Make sure the Dremel cutting tool is unplugged then visually inspect:
−
** Ensure cutting wheel is secure and not cracked
+
** Verify that the electrical cord is in good working order.
−
** Verify electrical cord is in good working order.
** Make sure the power switch is in the off position.
** Make sure the power switch is in the off position.
−
* Put a diamond blade on the Dremel.
+
* Put a diamond blade on the Dremel. (Ensure that the cutting wheel is secure and not cracked.)
[[File:Dremel2.JPG|thumb|center|upright|The Dremel tool used to cut the fibers, with a diamond blade and foam pad, and an example of appropriate eye wear.]]
[[File:Dremel2.JPG|thumb|center|upright|The Dremel tool used to cut the fibers, with a diamond blade and foam pad, and an example of appropriate eye wear.]]