Changes

Jump to navigation Jump to search
Line 12: Line 12:  
==Comparison Among Spools==
 
==Comparison Among Spools==
 
[[File:S1 Ave Spread.png|400px|thumb|right|Histogram C: S1 Average Width Spread.]]  [[File:A2 Ave Spread.png|400px|thumb|right|Histogram E: A2 Average Width Spread.]] [[File:S2 Ave Spread.png|450px|thumb|left|Histogram D: S2 Average Width Spread.]]
 
[[File:S1 Ave Spread.png|400px|thumb|right|Histogram C: S1 Average Width Spread.]]  [[File:A2 Ave Spread.png|400px|thumb|right|Histogram E: A2 Average Width Spread.]] [[File:S2 Ave Spread.png|450px|thumb|left|Histogram D: S2 Average Width Spread.]]
Every fiber was cut from one of four spools delivered by the manufacturer. An analysis of the widths of fibers from each spool was performed to determine if a significant difference in quality of fiber exists between them. The spools are named "A1", "A2", "S1", and "S2", where only six fibers were cut from spool A1 so it was omitted from the analysis due to lack of representative data. The average widths are within .025mm of each other indicating a consistent fiber size across spool. The standard deviation of spool S2 is about one and a half times as large as the other two showing substantially more change in the average width along fibers. This difference is still only on the order .01mm so no spool can be said to be significantly worse than the rest.
+
Every fiber was cut from one of four spools delivered by the manufacturer. An analysis of the widths of fibers from each spool was performed to determine if a significant difference in quality of fiber exists between them. The spools are named "A1", "A2", "S1", and "S2", where only six fibers were cut from spool A1 so it was omitted from the analysis due to lack of representative data. As can be seen from histograms C through E the average widths are within .025mm of each other indicating a consistent fiber size across spool. The standard deviation of spool S2 is about one and a half times as large as the other two showing substantially more change in the average width along fibers. This difference is still only on the order .01mm so no spool can be said to be significantly worse than the rest.
179

edits

Navigation menu