Line 8:
Line 8:
* Ensure: sleeves are rolled up, hair is tied back, and jewlery is secured.
* Ensure: sleeves are rolled up, hair is tied back, and jewlery is secured.
* Locate logbook used for data recording.
* Locate logbook used for data recording.
+
[[File:JK Dremel.JPG|thumb|left|upright|The Dremel tool used to cut the fibers and an example of appropriate eye wear.]]
* Make sure the Dremel cutting tool is unplugged then visually inspect:
* Make sure the Dremel cutting tool is unplugged then visually inspect:
** Ensure cutting wheel is secure and not cracked
** Ensure cutting wheel is secure and not cracked
Line 13:
Line 14:
** Make sure the power switch is in the off position.
** Make sure the power switch is in the off position.
* Plug in the Dremel tool.
* Plug in the Dremel tool.
−
−
[[File:JK Dremel.JPG|thumb|center|upright|The Dremel tool used to cut the fibers and an example of appropriate eye wear.]]
−
* Set the cutting speed to 7.
* Set the cutting speed to 7.
*Check that the ventilation hose is secure and start the ventilation system.
*Check that the ventilation hose is secure and start the ventilation system.