261
edits
Changes
Jump to navigation
Jump to search
mLine 1,053:
Line 1,053: − +
Digital control board documentation (view source)
Revision as of 19:28, 16 June 2009
, 19:28, 16 June 2009→Eurocard Connector
== Eurocard Connector ==
== Eurocard Connector ==
At the bottom of the control board is the Eurocard connector. The Eurocard connector connects the board to the backplane and also connects the board to its power supplies. The Eurocard has 48 pins arranged in three rows of 16 pins each. Rows B and C are exclusively used to pass SiPM bias voltages to the backplane as described in [[#Channel Mapping | DAC Channel Mapping]]. Here is a table describing the purpose of pins in row A:
At the bottom of the control board is the Eurocard connector, labelled P2. The Eurocard connector connects the board to the backplane and also connects the board to its power supplies. The Eurocard has 48 pins arranged in three rows of 16 pins each. Rows B and C are exclusively used to pass SiPM bias voltages to the backplane as described in [[#Channel Mapping | DAC Channel Mapping]]. Here is a table describing the purpose of pins in row A:
=== Row A Pinout Table ===
=== Row A Pinout Table ===